Sigma C4 Manual do Utilizador descarregar pdf (Página 83)

Field

Field Purpose

Permitted Field

Values

Factory Setting

C4 Manual Rev 7.5.2

Chamber/Platform Lower

Operating Temperature Limit

-200/C

-327.9/F

As required

Default = -100

Chamber/Platform Upper

Operating Temperature Limit

500/C

932/F

As required

Default = 200

Unit Under Test (UUT) Lower

Operating Temperature Limit

-200/C

-327.9/F

As required

Default = -100

Unit Under Test (UUT) Upper

Operating Temperature Limit

500/C

932

As required

Default = 200

Unit Under Test (UUT) Lower

Operating Temperature

Differential Limit

From 1 to full

controller range

(ie.: 300 for a -100

to +200

controller)

Full controller

range (ie.: 300

for a -100 to

+200 controller)

Unit Under Test (UUT) Upper

Operating Temperature

Differential Limit

Note: The setup field parameters are stored in non-volatile memory that is

retained even during power down.

8.1 Displaying the Field Values

The contents of field 0 is displayed upon entering the Setup mode. To display the

next field, press <DISP/CNTL>. Pressing <DISP/CNTL> after field 30 will cause

field 0 to be re-displayed. Pressing <DISP/TEMP> will scroll backward. Entering

a 2 digit number and pressing <ENTER> will display the entered field without

having to scroll through the list.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 119 120

Comentários a estes Manuais

Sem comentários

Sigma C4 Manual do Utilizador Página 83

Comentários a estes Manuais

Manuais e produtos relacionados com não Sigma C4